Jura GIGA X8c - Changing the Water Filter; Machine Cleaning Program

45
5 Maintenance
E After the set amount of water has flowed through the external
filter cartridge, it will cease to work. Your GIGA will automati-
cally prompt you to change the filter.
Example:Proceed as follows to change the filter when prompted to
do so.
Precondition:
‘Change the filter’ and the symbol c are displayed.
T Change the external filter cartridge as described in the
instructions for the cartridge.
 O T Press the P button.
‘Maintenance status (1/5)’
T Press the ‘Change the filter’ button.
‘Change the filter’/ ‘Do you really want to reset the filter
capacity?’
T Press the ‘Yes’ button
‘Change the filter’/ ‘Filter capacity has been reset.’
‘Please select product:’
appears on the display.
After 220preparations or 80switch-on rinses, the GIGA will prompt
you to clean it.
If the wrong cleaning agent is used, the machine could be damaged
and/or traces could be left behind in the water.
T Use only original JURA maintenance products.
E The cleaning programme lasts approximately 20 minutes.
E Do not interrupt the cleaning programme. The quality of
cleaning will be impaired if you do so.
E JURA cleaning tablets are available from specialised dealers.
Example:Proceed as follows to clean when prompted to do so.
Precondition:
‘Clean machine.’ and the symbol c are displayed.
 O T Press the P button.
‘Maintenance status (1/5)’
T Press the ‘Clean’ button.
T Press the
‘Start’ button.
T Press the
‘Start’ button again.
‘Empty coffee grounds container.’
T Empty the drip tray and coffee grounds container and put
them back into the machine.
‘Press the Rotary Switch.’
Changing the filter
Cleaning the machine
CAUTION