EasyManua.ls Logo

Jura GIGA6 - Preparing Speciality Coffees with Milk

Jura GIGA6
56 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
18
2 Preparation
Your GIGA prepares latte macchiato, cappuccino, flat white and
other speciality coffees with milk at the touch of a button. There is
no need to move the glass or cup.
Example:Proceed as follows to prepare one latte macchiato.
Precondition:The start screen is displayed. Milk is connected to the
dual spout (page ‘ö ä’).
TPlace a glass under the dual spout.
TTouch ‘Latte macchiato’.
‘Latte macchiato, the preset amounts of milk and milk foam
flow into the glass.
E There is a short interval while the hot milk separates from the
milk foam. This allows the typical layers of a latte macchiato
to form.
Coffee preparation starts. The preset amount of water for
espresso flows into the glass. Preparation stops automati-
cally. Your GIGA is once more ready for use.
E 15 minutes after preparation, the milk system is automatically
rinsed (see Chapter 5 ‘Maintenance – Automatic milk system
rinsing’). Therefore always place a receptacle under the dual
spout after preparing milk.
To ensure that the milk system in the dual spout always works prop-
erly, you must clean it daily (see Chapter 5 ‘Maintenance – Cleaning
the milk system’).
For the ‘caffè Barista’ and ‘lungo Barista’, the GIGA blends the coffee
with hot water using a special preparation method. This results in a
full-bodied speciality coffee which is particularly easy to digest. You
can change the amount of this additional water (see Chapter 4 ‘Per-
manent settings in programming mode – Adjusting the product
settings’).
E The bypass amount of water cannot be changed during the
preparation process.
Preparing speciality
coffees with milk
Caffè Barista and lungo
Barista

Table of Contents

Related product manuals