Jura IMPRESSA A5 One Touch - Rinses; Unit for Amount of Water

47
4 Permanent settings in programming mode
pt
es
nl
it
fr
ru
en
de
k T Press the Rotary Switch to confirm the
setting.
OK, the switch-off time is set.
OFF AFTER
g T Turn the Rotary Switch until EXIT is
displayed.
k T Press the Rotary Switch to exit programming
mode.
READY
Rinses
In the programme item RINSES you can make
the following settings:
U
INIT RINSE MANUAL
U
The switch-on rinse must be started
manually.
U
INIT RINSE AUTOMATIC
U
The switch-on rinse is started automatically.
U
C-RINSE AFTER10'
U
You are prompted to perform a cappuccino
rinse 10minutes after preparation of a
speciality coffee with milk.
U
C-RINSE NOW
U
You are prompted to perform a cappuccino
rinse immediately after preparation of a
speciality coffee with milk.
Example:Change the setting such that cappuccino
frother rinsing is performed immediately after
preparation of a speciality coffee with milk.
Precondition:
READY is displayed.
k T Press and hold the Rotary Switch until
RINSE appears.
g T Turn the Rotary Switch until
RINSES is
displayed.
k T Press the Rotary Switch to enter the
programme item.
INIT RINSE
g T Turn the Rotary Switch until C-RINSE is
displayed.
k T Press the Rotary Switch to enter the
programme item.
AFTER10'
g T Turn the Rotary Switch until NOW is
displayed.
k T Press the Rotary Switch to confirm the
setting.
OK
C-RINSE
g T Turn the Rotary Switch until EXIT is
displayed.
k T Press the Rotary Switch to exit the pro-
gramme item.
RINSES
g T Turn the Rotary Switch until EXIT is
displayed.
k T Press the Rotary Switch to exit programming
mode.
READY
Unit for amount of water
You can change the unit for the amount of water
from ‘ml’ to ‘oz’.
Example:Change the unit for the amount of water
from
ML to OZ.
Precondition:
READY is displayed.
k T Press and hold the Rotary Switch until
RINSE appears.
g T Turn the Rotary Switch until
DISPLAY is
displayed.
k T Press the Rotary Switch to enter the
programme item.
ML
g T Turn the Rotary Switch until OZ is displayed.
k T Press the Rotary Switch to confirm the
setting.
OK, the unit for the amount of water is set.
DISPLAY
g T Turn the Rotary Switch until EXIT is
displayed.
k T Press the Rotary Switch to exit programming
mode.
READY