Jura IMPRESSA C5 - Welcome to the World of IMPRESSA!

10
IMPRESSA C5 – Quick Reference Guide
r l Turn the switch in the anticlockwise direction.
This causes water to flow out of the Connector System
©
.
The operation stops automatically, and the light segment by
the switch flashes.
t l Turn the switch in the clockwise direction.
The descaling operation will resume. After a few minutes,
the coffee grounds container indicator
x flashes.
Empty the drip tray and the coffee grounds container.
Insert the empty drip tray and coffee grounds container
back in the machine.
Put back the frother.
The descaling operation is now complete. The Maintenance
symbol
h flashes, the IMPRESSA heats up and is once again
ready for use.
If the descaling operation stops unexpectedly, rinse the water
tank thoroughly.
To ensure that the Easy Cappuccino Frother works perfectly, you
should rinse it with water whenever you have prepared some milk.
The IMPRESSA will not prompt you to rinse the Easy Cappuc-
cino Frother.
Carefully remove the Easy Cappuccino Frother from the
Connector System
©
.
Take the Easy Cappuccino Frother apart.
Rinse all the frother parts thoroughly under running water .
Reassemble the Easy Cappuccino Frother and attach it to the
Connector System
©
.
l
l
l
o
o
l
l
l
l
Rinsing the Easy
Cappuccino Frother
Rinsing the Easy
Cappuccino Frother