15
2 Preparing and using your IMPRESSA for the fi rst time
If the machine is operated with a defective power cable, there is
a danger of electric shock.
Never use a machine which has a defective power cable.
Precondition: the water tank must be full.
Remove the protective fi lm from the symbol display.
Insert the mains plug into a power socket.
e l Switch on the IMPRESSA using the power switch on the
back of the machine.
The On/Off symbol
G will light up to indicate that the
machine is on standby.
m l Press the Rotary Switch to switch the IMPRESSA on.
The light segment by the switch will now fl ash.
Place a receptacle under the Easy-Auto-Cappuccino
Frother.
r l Turn the switch in the anticlockwise direction.
The light segment by the switch will now light up. The
system will now be fi lled with water. A small amount of
water will fl ow out of the Easy-Auto-Cappuccino Frother.
The operation stops automatically. The light segment by
the switch will now fl ash.
t l Turn the switch in the clockwise direction.
As long as the machine is heating up, the Maintenance
symbol
h will fl ash. The Maintenance symbol h lights
up.
Place a receptacle under the coffee spout.
m l Press the Rotary Switch.
The machine will rinse itself, stopping automatically.
l
l
l
l
l
First-time use First-time use
WARNINGWARNING
To Next Page
Loading...
