20
2 Preparing and using your IMPRESSA for the fi rst time
m l Press the Rotary Switch to initiate preparation of the
coffee.
The grinder will now start up, and the 1 coffee symbol D
fl ashes
.
Turn the fi neness of grind switch to the desired position
while the grinder is running.
The coffee will be prepared and the fi neness of grind is
set.
When the IMPRESSA is switched on, a prompt to perform a
rinse operation automatically appears.
Precondition: your IMPRESSA is switched on at the power
switch and the On/Off symbol
g is illuminated (standby).
m l Press the Rotary Switch to switch the IMPRESSA on.
As long as the machine is heating up, the Maintenance
symbol
h will fl ash. The Maintenance symbol h lights up.
Place a receptacle under the coffee spout.
m l Press the Rotary Switch to start the rinse operation.
The coffee spout will be rinsed. The operation stops auto-
matically and your IMPRESSA is now ready for use.
When you switch off your IMPRESSA, the system is automati-
cally rinsed.
Place a receptacle under the coffee spout.
ä l Turn the Rotary Switch to the On/Off symbol g.
m l Press the Rotary Switch to switch the IMPRESSA off.
The system is rinsed and the Maintenance symbol
H
fl ashes. The operation stops automatically.
The IMPRESSA is switched off (in standby mode), and
the On/Off symbol
G is illuminated.
l
l
l
Switching on Switching on
Switching off
(standby mode)
Switching off
(standby mode)
To Next Page
Loading...
