36
6 Adjusting the default cup size settings
It is easy to adjust the amount of water for all coffee speciali-
ties to the cup size for good. As in the following example, adjust
the amount of water once. Every time you prepare a drink in the
future, this amount of water will be dispensed.
Permanent adjustment of cup size works the same way for all
coffee specialities.
Example: to permanently adjust the amount of water for an
Espresso, you should proceed as follows:
Place an Espresso cup under the coffee spout.
ä l Turn the Rotary Switch to the 1 Espresso setting a.
m l Keep the Rotary Switch pressed down until the light
segment fl ashes above the Rotary Switch.
Coffee preparation will start and the Espresso will fl ow
into the cup.
m l Press the Rotary Switch again when enough Espresso
has fl own into the cup.
Espresso preparation will now stop. Your IMPRESSA
will remember the amount of water you have specifi ed
for an Espresso for good.
You can alter these settings at any time by repeating the
above procedure.
l
o
6 Adjusting the default cup size settings6 Adjusting the default cup size settings
To Next Page
Loading...
