Jura IMPRESSA C5 - Adjusting Default Settings in Programming Mode; Automatic Switch-Off Time

37
7 Adjusting the default settings in programming mode
By instructing your IMPRESSA to automatically switch itself
off, you can cut down your energy consumption.
The default setting for automatic switch-off time is
4 hours.
The number of symbols illuminated indicates the automatic
switch-off time that has been activated in hours.
Precondition: your IMPRESSA must be switched off (standby
mode).
Example: to amend the automatic switch-off time from 4 hours
to 2, you should proceed as follows:
Open the access door.
v l Hold down the Cleaning button until the Cleaning
indicator
v lights up.
The IMPRESSA is in programming mode, the Cleaning
indicator
v and the symbols a s d are illuminated.
o
l
7 Adjusting the default settings in programming mode7 Adjusting the default settings in programming mode
Automatic switch-off
time
Automatic switch-off
time
Automatic switch-off time Shown in symbol display Meaning
Not active No symbol is illuminated No automatic switch-off
1 hour 1 symbol is illuminated
a
Automatic switch-off after
1 hour
2 hours 2 symbols are illuminated
a s
Automatic switch-off after
2 hours
4 hours 3 symbols are illuminated
a s d
Automatic switch-off after
4 hours
8 hours 4 symbols are illuminated
a s d f
Automatic switch-off after
8 hours
Automatic switch-off time Shown in symbol display Meaning
Not active No symbol is illuminated No automatic switch-off
1 hour 1 symbol is illuminated
a
Automatic switch-off after
1 hour
2 hours 2 symbols are illuminated
a s
Automatic switch-off after
2 hours
4 hours 3 symbols are illuminated
a s d
Automatic switch-off after
4 hours
8 hours 4 symbols are illuminated
a s d f
Automatic switch-off after
8 hours