46
8 Maintenance
To ensure that the Easy-Auto-Cappuccino Frother works
perfectly, you should rinse it with water whenever you have
prepared some milk.
The IMPRESSA will not prompt you to rinse the Easy-
Auto-Cappuccino Frother.
Carefully remove the Easy-Auto-Cappuccino Frother
from the Connector System
©
.
Take the Easy-Auto-Cappuccino Frother apart.
Rinse all the frother parts thoroughly under running water.
Reassemble the Easy-Auto-Cappuccino Frother and at-
tach it to the Connector System
©
.
To ensure that the Easy-Auto-Cappuccino Frother works
perfectly, you should clean it daily when you have been preparing
milk.
The IMPRESSA will not prompt you to clean the Easy-
Auto-Cappuccino Frother.
Your dealer will stock the JURA Auto-Cappuccino Cleaner.
If the wrong cleaning agent is used, the machine could be damaged
and/or traces of detergent could be left behind in the water.
Use only original JURA care products.
Try this operation out on the Internet. Visit the Knowledge
Builder on www.jura.com.
Precondition: your IMPRESSA is ready for use.
Place a receptacle under the Easy-Auto-Cappuccino
Frother.
Pour 250 ml of fresh water into a container and add one
capful (max. 15 ml) of Auto-Cappuccino Cleaner.
o
l
l
l
l
o
o
l
@
l
l
Rinsing the Easy-
Auto-Cappuccino
Frother
Rinsing the Easy-
Auto-Cappuccino
Frother
Cleaning the Easy-
Auto-Cappuccino
Frother
Cleaning the Easy-
Auto-Cappuccino
Frother
CAUTIONCAUTION