60
12 Transport and environmentally neutral disposal
To protect the IMPRESSA from damage caused by frost during
transportation, the system needs to be emptied.
Precondition: the IMPRESSA is ready for use.
l Place a receptacle under the frother.
ä l Turn the Rotary Switch so that it points to the Steam
symbol
k.
m l Press the Rotary Switch to confi rm your choice.
The Steam symbol
k will continue fl ashing until the
machine has warmed up. As soon as the required
temperature has been reached, the light segment by the
switch will fl ash.
r l Turn the switch in the anticlockwise direction.
Steam will now come out of the frother.
l Remove the water tank and empty it.
Steam will continue to fl ow out of the frother until the sys-
tem is empty. The light segment by the switch will now fl ash.
t l Turn the switch in the clockwise direction.
The Maintenance indicator and the Water Tank indicator
y
both fl ash. Please ignore these indicators.
m l Press the Rotary Switch to turn the machine off.
e l Turn your IMPRESSA off at the power switch.
The next time you use the machine, you will need to refi ll
the system (see Chapter 2, 'Preparing and using your
IMPRESSA for the fi rst time – fi rst-time use').
Keep the packaging for your IMPRESSA. It is used to protect
the machine during transportation.
Please dispose of old machines in an environmentally neutral way.
Old machines contain valuable materials capable of being
recycled which should be salvaged for recycling. Please therefore
dispose of old machines via suitable collection systems.
o
o
12 Transport and environmentally neutral disposal12 Transport and environmentally neutral disposal
Empty systemEmpty system
TransportTransport
DisposalDisposal
To Next Page
Loading...
