16
2 Preparing and using your IMPRESSA for the first time
If the machine is operated with a defective power cable, there is a
danger of electric shock.
T Never use a machine which has a defective power cable.
Precondition: The water tank and bean container are full.
T Insert the mains plug into a power socket.
3 T Switch on the IMPRESSA using the power switch on the back
of the machine.
The indicator light lights up (standby).
Q T Press the On/Off button to switch the IMPRESSA on.
The pre-set language appears on the display.
T Open the cover of the Rotary Switch.
The Rotary Switch lights up.
g T Turn the Rotary Switch until the desired language is dis-
played. For Example:
LANGUAGE ENGLISH
k T Press the Rotary Switch to confirm the language.
OK appears briefly on the display to confirm the setting.
PRESS RINSE, the maintenance button c lights up.
T Close the cover of the Rotary Switch.
T Place a receptacle under the frother.
c T Press the maintenance button.
SYSTEM FILLING, the system fills up with water. A
small amount of water flows from the frother.
This operation stops automatically, the following appears on
the display:
HEATING.
PRESS RINSE, the maintenance button c lights up.
T Place a receptacle under the coffee spout.
c T Press the maintenance button.
RINSING, the machine rinses. The operation stops auto-
matically.
READY, your IMPRESSA is ready to use.
First-time use
WARNING
To Next Page
Loading...
