Jura IMPRESSA C9 - Disassembling and Rinsing the Professional Cappuccino Frother

11
IMPRESSA C9 – Quick Reference Guide
Immerse the milk pipe in the receptacle.
Turn the selection lever of the frother to the milk foam posi-
tion p or milk t.
Place another receptacle under the frother.
c T Press the maintenance button.
CLEANING, the frother and pipe are cleaned. The opera-
tion stops automatically.
WATER FOR CAPPUCCINO
Rinse the receptacle thoroughly, fill it with approx. 250 ml
of fresh water and immerse the milk pipe in the water.
Empty the other receptacle and place it under the frother
once more.
c T Press the maintenance button.
CLEANING, the frother and pipe are rinsed with fresh
water.
Preparation stops automatically. READY appears on the
display.
Close the cover of the Rotary Switch.
Carefully remove the frother from the Connector System
©
by twisting slightly.
Dismantle the frother completely.
Rinse all the frother parts thoroughly under running water.
Reassemble the frother.
Ensure that the individual parts are correctly and firmly
attached to one another to ensure optimum function of the
frother.
Firmly attach the frother to the Connector System
©
.
T
T
T
T
T
T
T
T
T
T
E
T
Disassembling and
rinsing the
Professional
Cappuccino Frother
Disassembling and
rinsing the
Professional
Cappuccino Frother