23
2 Preparing and using your IMPRESSA for the first time
You can adjust the grinder continuously to suit the roast of your cof-
fee.
If you adjust the fineness of grind when the grinder is not operating,
the grinding wheel could be damaged.
Only adjust the fineness of grind when the grinder is run-
ning.
The fineness of grind setting is correct if the coffee flows regularly
from the coffee spout. A fine, thick crema is also formed.
Our recommendations:
Select a fine setting for a light roast.
If the fineness of grind setting is too fine, the coffee only
drips from the coffee spout.
Select a coarse setting for a darker roast.
If the fineness of grind is too coarse the coffee flows too
quickly from the coffee spout.
Example: To change the fineness of grind during coffee preparation,
proceed as follows:
Open the cover of the bean container.
Remove the aroma preservation cover.
Place a cup under the coffee spout.
o T Press the Coffee button.
The grinder starts and 1 COFFEE is displayed. After this,
the coffee strength is briefly displayed.
Turn the fineness of grind switch to the desired position
while the grinder is running.
The coffee will be prepared and the fineness of grind is
adjusted.
Close the aroma preservation cover and the cover of the
bean container.
T
Z
U
Z
U
T
T
T
T
T
Adjusting the grinderAdjusting the grinder
CAUTIONCAUTION
To Next Page
Loading...
