Jura IMPRESSA C9 - Unit Amount of Water;Time Format; Language

50
6 Permanent settings in programming mode
You can change the unit of the amount of water from ’ml’ to ’oz’ and
the time format to ’24 HRS’ or ’AM/PM’ .
Example: To change the unit for the amount of water from ML to
OZ, proceed as follows.
Precondition: READY is displayed.
Open the cover of the Rotary Switch.
k T Keep the Rotary Switch pressed until RINSE appears.
g T Turn the Rotary Switch until DISPLAY is displayed.
k T Press the Rotary Switch to enter the programme item.
ML/OZ
To change the time format, turn the Rotary Switch until 24H/
AM PM is displayed.
k T Press the Rotary Switch to enter the programme item.
ML
g T Turn the Rotary Switch until OZ is displayed.
k T Press the Rotary Switch to confirm the setting.
OK appears briefly on the display to confirm the setting.
ML/OZ
g T Turn the Rotary Switch until EXIT is displayed.
k T Press the Rotary Switch to exit the programme item.
DISPLAY
g T Turn the Rotary Switch until EXIT is displayed.
k T Press the Rotary Switch to exit programming mode.
READY
Close the cover of the Rotary Switch.
The language of your IMPRESSA is set with this programme item.
Example: To change the language from ENGLISH to DEUTSCH,
proceed as follows.
Precondition: READY is displayed.
Open the cover of the Rotary Switch.
k T Keep the Rotary Switch pressed until RINSE appears.
g T Turn the Rotary Switch until LANGUAGE is displayed.
k T Press the Rotary Switch to enter the programme item.
ENGLISH
T
E
T
T
Unit amount of water/
Time format
Unit amount of water/
Time format
LanguageLanguage