88
14 Technical data
The voltage and current vary according to the safety test.
Please refer to the rating plate before connecting the device.
The rating plate is located on the bottom of your IMPRESSA. The
information shown on the rating plate has the following meaning:
V AC = alternating current in volts
W = power output in watts
A = This product complies with all applicable EU directives.
S = This product meets the requirements of the Decree con-
cerning Low Voltage Electrical Products and the Decree con-
cerning Electromagnetic Compatibility (VEMV). This is issued
by the ESTI (Swiss Federal Inspectorate for Heavy Current
Installations).
F = This product complies with all applicable UL directives
(Underwriters Laboratories Inc.
®
).
D = This product complies with all applicable SAA directives
(Standards Association of Australia).
G = This product complies with all applicable CCC directives
(China Compulsory Certification).
E
Z
Z
Z
Z
Z
Z
Z
14 Technical data14 Technical data
Rating plateRating plate
Voltage
A S
F
D
G
230 V AC, 50 Hz
120 V AC, 60 Hz
220 –240 V AC, 50 Hz
220 V AC, 50 Hz
Power 1450 W
Safety test
S F D G
Power consumption
in standby mode
3,7 Wh
Power consumption
ENERGY SAVE -
18 Wh
Power consumption
ENERGY SAVE w.
11 Wh
Pump pressure Static max. 15 bar
Technical dataTechnical data
To Next Page
Loading...
