Jura IMPRESSA F7 - Fill Water Tank; First-Time Use with Filter Cartridge Activation

11
1 Preparing and using for the first time
E The water volume is given as standard in ‘oz’. You can change
this setting to ‘ml’ in programming mode (see Chapter 4 ‘Per-
manent settings in programming mode – Unit for amount of
water’).
Precondition:The bean container has been filled.
T Insert the power plug into a power socket.
 3 T Switch on the IMPRESSA using the power switch on the back
of the machine.
 Q T Press the On/Off button to switch the IMPRESSA on.
LANGUAGE ENGLISH appears on the display.
 k T Press the Rotary Switch to confirm the language.
OK appears briefly on the display to confirm the setting.
FILTERw YES
E Now decide whether you want to operate your IMPRESSA with
or without a CLEARYL Blue filter cartridge.
 k T Press the Rotary Switch.
OK appears briefly on the display.
FILTER INSERT
 k T Press the Rotary Switch.
FILL WATER TANK
T Open the water tank cover.
T Remove the water tank and rinse it with cold water.
T Open the filter holder.
T Remove the CLEARYL Blue filter cartridge from the Welcome
Pack.
T Insert the CLEARYL Blue filter cartridge into the water tank,
exerting slight pressure.
T Close the filter holder. It will click into place audibly.
E After three months, the filter will cease to work. Set the date
on the date plate on the filter holder in the water tank.
T Fill the water tank with fresh, cold water and reinsert the
tank.
SWITCH OPEN
The arrow on the switch lights up.
First-time use with filter
cartridge activation