30
4 Permanent settings in programming mode
In the program item RESET ALL you can reset various settings
to their factory settings:
U
PRODUCT
U
The settings (amount, coffee strength and temperature) for
any product can be reset individually to the factory settings.
The corresponding double product is also reset to the fac-
tory settings at the same time.
U
ALL PROD.
U
The settings (amount, coffee strength and temperature) for
all products are reset to the factory settings.
U
MACHINE
U
All user settings (apart from the ‘filter’ and ‘water hardness’)
are reset to factory settings. Your IMPRESSA then switches
off.
Example:Proceed as follows to reset the values for ‘Espresso’ to the
factory settings.
Precondition:
READY is displayed.
k T Press and hold the Rotary Switch until
RINSE appears.
g T Turn the Rotary Switch until
RESET ALL is displayed.
k T Press the Rotary Switch to enter the program item.
PRODUCT
k T Press the Rotary Switch.
SELECT BUTTON
< T Press the Espresso button.
OK appears briefly on the display.
PRODUCT
g T Turn the Rotary Switch until EXIT is displayed.
k T Press the Rotary Switch to exit the program item.
RESET ALL
g T Turn the Rotary Switch until EXIT is displayed.
k T Press the Rotary Switch to exit programming mode.
READY
Restore factory settings
To Next Page
Loading...
