23
Thoroughly rinse the water tank and fill it with fresh cold tap
water. Then reinstall it.
Place a sufficiently large receptacle under the hot water spout
(Fig. 16).
PRESS MAINTENANCE / REFILL WATER
MACHINE DE-SCALING
The water comes out of the hot water jet in intervals. After some
intervals the water is discharged directly in the drip tray.
EMPTY TRAY. You will hear an acoustic signal.
PRESS MAINTENANCE
MACHINE RINSING:
PLEASE SELECT
After the de-scaling, clean the aluminium front using a
slightly moist cloth.
17. Disposal
Please dispose of old machines in an environmentally
compatible way
Old machines contain valuable materials capable of being
recycled which should be salvaged for recycling. Please
therefore dispose of old machines via suitable collection
systems.
18. Tips for perfect coffee
Adjustable coffee spout
You can adjust the height of the coffee spout to the size of your
cups
Grinding degree
Refer to Chapter 3.5 «Adjusting the grinding gear».
Preheating cups
You can preheat the cups using hot water or steam. The smaller the
coffee you want to draw off, the more important preheating is.
Sugar and cream
Stirring coffee/tea will result in heat being released. Adding
refrigerated cream or milk will reduce the temperature of the coffee
significantly.
E
To Next Page
Loading...
