60
8 Maintenance
To ensure that the Professional Cappuccino Frother works per-
fectly, you should rinse it with water after every milk prepara-
tion.
The IMPRESSA will not prompt you to rinse the
Professional Cappuccino Frother.
Remove the milk pipe from the milk carton/bottle or the
milk container.
Fill the receptacle with 250 ml of fresh water and immerse
the milk pipe in it.
Place a receptacle under the Professional Cappuccino
Frother.
Turn the selection lever to the milk or milk foam posi-
tion.
k l Press the steam button.
HEATING
READY
k l Press the steam button again.
STEAM
- The nozzle and pipe are rinsed.
Press any button as soon as clean water flows into the
cup.
To ensure that the Professional Cappuccino Frother works per-
fectly, you should clean it daily when you have been preparing
milk.
If the wrong cleaning agent is used, the machine could be dam-
aged and/or traces of detergent could be left behind in the
water.
Use only original JURA care products.
The IMPRESSA will not prompt you to clean the
Professional Cappuccino Frother.
The JURA Auto-Cappuccino Cleaner is available from your
stockist.
o
l
l
l
l
l
l
o
o
Rinse Professional
Cappuccino Frother
Rinse Professional
Cappuccino Frother
Clean Professional
Cappuccino Frother
Clean Professional
Cappuccino Frother
CAUTIONCAUTION
To Next Page
Loading...
