Cleaning procedures for the Jura X9
DECALCIFYING
DECALCIFYINGDECALCIFYING
DECALCIFYING
When using acidic decalcifying agents,
immediately remove any splashes or drops
from sensitive surfaces, in particular surfaces
made of natural stone or wood
Do not interrupt program once started
This programme lasts approx. 45 minutes
You will know your machine needs
decalcifying when the signal below appears.
If you make more coffees display will read
DECALCIFY.
If you make even more coffees display will
read DECALCIFY NOW
.
Open the programming door on the front
and press this key
_
Step 2
Remove the tray and the grounds bin and
EMPTY the coffee grounds.
Step 3
Place the grounds bin and the tray back into the
machine
MISSING
Step 4
Completely dissolve 3 JURA tablets in 700mls of
water and pour the solution into the empty water
tank.
Step 5
Place a large container under the
dual spout, the steam spout and the hot water
spout.
Step 6
Press this key
You will hear an acoustic signal.
Step 7
Remove the tray
To Next Page
Loading...
