Jura IMPRESSA Z9 One Touch TFT - First-time Use with Filter Cartridge

11
1 Preparing and using for the first time
E The water volume is given as standard in ‘oz’. You can change
this setting to ‘ml’ in programming mode (see Chapter 4
‘Permanent settings in programming mode – Unit for amount
of water’).
Precondition:The bean container has been filled.
T Insert the power plug into a power socket.
 3 T Switch on the IMPRESSA using the power switch on the left-
hand side of the machine.
 Q T Press the On/Off button to switch the IMPRESSA on.
The display shows the languages you can choose from.
E To display more languages, press the
‘Next’ button (bottom
right).
T Press the button that corresponds to the language you want,
e.g.
‘English’.
‘Saved’ appears briefly on the display to confirm the setting.
‘Use filter’
E Now decide whether you want to operate your IMPRESSA with
or without a CLEARYL Blue filter cartridge.
Milk, sparkling mineral water or other liquids can damage the water
tank or the machine.
T Only fill the water tank with fresh, cold water.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘Insert filter.’
T Open the water tank cover.
T Remove the water tank and rinse it with cold water.
T Remove the filter cartridge extension from the Welcome
Pack.
T Fit the filter extension on top of a CLEARYL Blue filter
cartridge.
First-time use with filter
cartridge activation
NOTICE