20
4 Permanent settings in programming mode
4 Permanent settings in programming mode
Hot coffee, hot steam and hot water can cause scalding. Scalding is
a serious burn.
T Use extreme care when handling hot liquid or steam.
T Allow liquid to cool down before drinking.
T In the event of scalding, rinse affected area with cold water an
seek medical attention.
T Keep children AWAY.
Press the ‘P’ button to enter programming mode. You can navigate
through the program items and permanently save the required
settings using the multi-function buttons. The following settings
can be made:
Program
item
Sub-item Explanation
‘1/5’ ‘Clean’,
‘Descale’,
‘Filter’ (only if filter is activated)
T Start the required maintenance program here.
‘2/5’ ‘Rinse the coffee system’,
‘Information’
T Here you can start coffee system rinsing or find
out what maintenance actions are required.
‘3/5’ ‘Expert mode’
T Select your settings for specialty coffees and
hot water.
‘Customise cup fill volume’
T Disable the function "Permanently setting the
amount of water for the cup size".
‘One-off settings’
T Specify whether or not to allow one-off settings
during preparation.
‘Lock/enable’
T Enable or disable individual products.
‘4/5’ ‘Choose language’
T Select your language.
‘Units’
T Select the unit for the amount of water.
‘Switch off after’
T Set the time after which the JURA should switch
off automatically.
‘Water hardness’
T Adjust the water hardness.
‘5/5’ ‘Product counter’,
‘Day counter’,
‘Maintenance counter’,
‘Version’
T Keep track of all prepared products and view
the maintenance status.
J WARNING
To Next Page
Loading...
