Jura WE8 - Enable and Disable Products; Automatic Switch-Off

26
4 Permanent settings in programming mode
Example:Proceed as follows to disable one-off settings during prep-
aration.
T Press the
‘Pc’ button.
T Press the
‘>’ button several times until ‘3/6’ is displayed.
T Press the
‘One-off settings’ button.
‘One-off settings’
T Press the ‘Inactive’ button.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘3/6’
T Press the ‘’ button to exit programming mode.
In the programme item
‘3/6’/ ‘Lock/enable’ you can enable or disa-
ble each product individually.
Example:Proceed as follows to disable the preparation of hot water.
T Press the
‘Pc’ button.
T Press the
‘>’ button several times until ‘3/6’ is displayed.
T Press the
‘Lock/enable’ button.
‘Lock/enable’
E The lock symbol beside the product name indicates whether
the product is enabled or disabled. If the lock is closed, the
product is disabled.
T Press the
‘>’ button until the product ‘Hot water’ is dis-
played.
T Press the
‘Hot water’ button.
The lock is closed. Hot water preparation is now disabled.
T Press the
‘’ button for around 2 seconds to exit program-
ming mode.
By instructing your JURA to automatically switch itself off, you can
cut down your energy consumption. If this function is activated,
your JURA switches off automatically after the preset time following
the last action on the machine.
You can set the automatic switch-off to 15minutes, 30minutes or
1–9hours.
T Press the
‘Pc’ button.
Enable and disable
products
Automatic switch-off