Jura Z10 - Connecting Milk; Connecting Cool Control; Establishing WiFi Connection

3 Preparing and using for the first time
14
Your Z creates fine, creamy, feather-light milk foam with a perfect
consistency. The most important requirement for frothing milk is a
milk temperature of – °F (– °C). We would therefore
recommend using a milk cooler or a milk container.
T
 Connect the milk pipe to the dual spout.
T
 Connect the other end of the milk pipe to a milk container or a
milk cooler.
Your Z can be connected with your Cool Control milk cooler.
Precondition:The JURA WiFi Connect is inserted into the service
socket of your Z.
T
 Press the Rotary Switch.
T
 Touch the ‘Machine setting’ f symbol.
T
 Touch ‘/’ to go to the next page.
T
 Touch ‘Connect accessory’.
T
 Touch ‘Connect’.
‘Saved’
Your Z can be connected with your JURA app (J.O.E.
®
).
Precondition:J.O.E.
®
is installed on your mobile end device and
you have logged into your home network. The JURA WiFi Connect
is inserted into the service socket of your Z.
T
 Press the Rotary Switch.
T
 Touch the ‘Machine setting’ f symbol.
T
 Touch ‘Wi-Fi connection’.
T
 Touch ‘Connect’.
T
 Add a new network in your JURA app (J.O.E.
®
) and follow the
instructions.
Connecting milk
Connecting the Cool Control
milk cooler wirelessly
Establishing a WiFi
connection