8 Display messages
33
8 Display messages
Messages on the start screen
Message Cause/Result Action
‘Fill water tank’ The water tank is empty. You cannot
prepare any products.
T
Fill the water tank (see chapter
‘Daily operation – Filling the water
tank’).
‘Empty coffee
grounds
container’ /
‘Empty drip
tray’
The coffee grounds container is full. /
The drip tray is full. You cannot
prepare any products.
T
Empty the coffee grounds container
and the drip tray (see chapter ‘Daily
operation – Maintenance actions’).
‘Drip tray not
fitted’
The drip tray is not inserted correctly
or is not inserted at all. You cannot
prepare any products.
T
Fit the drip tray.
‘Fill bean
container’
The bean container is empty. You
cannot prepare any specialty coffees,
but you can prepare hot water and
milk.
T
Fill the bean container (see chapter
‘Preparing and using for the first
time – Filling the bean container’).
‘Not enough
ground coffee’
There is insufficient ground coffee in
the machine; the Z stops the
operation.
T
The next time you prepare a
beverage, add more ground coffee
(see chapter ‘Preparation – Ground
coffee’).
‘Spout is not
fitted’
The cover of the dual spout has not
been fitted.
T
Correctly fit the cover of the dual
spout.
Messages in the Cockpit
Message Cause/Result Action
The filter symbol $
lights up red.
‘Change the filter’
Filter capacity is met .
T
Replace the CLEARYL Smart filter cartridge
(see chapter ‘Maintenance – Inserting/
changing the filter’).
‘Clean’ The Z is prompting you to
clean it.
T
Perform cleaning (see chapter
‘Maintenance – Cleaning the machine’).
‘Descale’ The Z is prompting you to
descale it.
T
Perform descaling (see chapter ‘
Maintenance – Descaling the machine ’).
‘Clean the milk
system’
The Z prompts you to
clean the milk system.
T
Perform milk system cleaning (see chapter
‘Maintenance – Cleaning the milk system’).
To Next Page
Loading...
