Jura Z8 - Changing the CLARIS Smart Filter Cartridge

38
5 Maintenance
‘Filter operation’ / ‘Saved’
‘Filter is being rinsed’
, the filter is rinsed. The water flows
directly into the drip tray.
‘Empty drip tray’
T Empty the drip tray and put it back into the machine.
‘Filter operation’ / ‘Filter rinsing complete’
The start screen is displayed. Your Z8 is once more ready for
use.
E Once the filter cartridge stops working (depending on the
water hardness setting), the Z8 will prompt you to change the
filter.
E CLARIS Smart filter cartridges are available from specialised
dealers.
Precondition:The start screen is displayed.
‘Change the filter’ is dis-
played.
T Remove and empty the water tank.
T Turn the filter cartridge anti-clockwise and remove it along
with the extension from the water tank.
T Fit the filter cartridge extension on top of a new CLARIS
Smart filter cartridge.
T Insert the filter cartridge with its extension into the water
tank.
T Turn the filter cartridge clockwise until it audibly clicks into
place.
T Fill the water tank with fresh, cold water and reinsert the
tank.
E The machine automatically detects that you have just changed
the filter cartridge.
‘Filter operation’ / ‘Saved’
‘Filter is being rinsed’
, the filter is rinsed. The water flows
directly into the drip tray.
‘Empty drip tray’
T Empty the drip tray and put it back into the machine.
‘Filter operation’ / ‘Filter rinsing complete’
The start screen is displayed. Your Z8 is once more ready for
use.
Changing the filter