Need help?Do you have a question about the Justin JM-LED Bright Strike 4 and is the answer not in the manual?
General| Brand | Justin |
|---|---|
| Model | JM-LED Bright Strike 4 |
| Category | DJ Equipment |
| Language | English |
Do not expose the unit to rain or moisture to prevent electrical shock or fire.
Avoid looking directly into the light source to prevent severe eye damage.
Cabling must have a male XLR connector on one end and a female XLR connector on the other.
Defines DMX channels CH1-CH5 for Red, Green, Blue, Strobe, and Auto mode speed.
Defines DMX channels CH1-CH14 for RGB color mixing and effects.
Procedure to set the DMX address using the control board buttons.
Procedure to select the desired auto mode for the fixture.
Procedure to select the desired sound mode for the fixture.
Procedure to select desired color mode, including static or custom mixing.
Procedure to select the DMX channel for control.
Procedure to set the fixture to slave mode.
Procedure to view the fixture's software version.
To Next Page