JVC AX-Z1010TN - Remote Control Unit (RM-SA1010 U); Description and Functions

AX-Z1010TN
REMOTE CONTROL
UNIT (RM-SA1010U)
Batteries
* How to install the batteries (Fig. 13)
1, Remove the battery cover by sliding the cover
of the battery case in the direction of the arrow.
2. Install the provided batteries (“‘AA”: UM-3, R6,
1.5 V), with their polarities properly placed.
Positive and negatives facing the correct
direction.
To operate the amplifier with the remote control
unit (RM-SA1010U) point it towards the “REMOTE
SENSOR” and press the buttons you want. The
remote contro} unit will activate the amplifier wi-
thin a range of about 7 meters (23 ft). If the remote
contro} unit is operated while being held at an ob-
lique angie the effective range will be reduced. Try
3. Re-Install the battery cover.
° Battery life
The batteries can be used for an average of 1 year.
° Battery replacement time
When the distance at which the remote contro! unit
functions begins to decrease, replace the batter-
ies (“AA": UM-3, R6, 1.5 V).
to point the unit directly towards the REMOTE
SENSOR of the amplifier
© Source Selector
‘Analog type
(Unit connected by COMPU LINK can be au-
tomatically operated using the remote control
unit)
CD: To play the CD player press the CD but-
ton on the remote control unit.
PHONO: To play the turntable press the
PHONO button on the remote control unit.
LINE 1; Press the LINE 1 button to play a
unit connected to the LINE 1 terminals on the
amplitier.
LINE 2: Press this button to play a unit con-
nected to the LINE 2 terminals on the amplifier
LINE 3: Press this button to play a unit con-
nected to the LINE 3 terminals on the amplifier.
DAT 1/TAPE 2: Press this button to play a
unit connected to the DAT 1/TAPE 2 terminals.
T 1/D 2 MON, T 1% D 1copy: Press this
button to on when monitoring playback/record-
‘ing of a tape deck connected to TAPE 4/DAT 2
terminals, or when using SEA graphic equaliz
er, or when copying (dubbing) from TAPE 1/
DAT 2 to: DAT 1/TAPE 2.
© SPEAKERS
These are the on/off buttons for speakers 1 and
| ped ‘onfimuee rea
et a |
T1702 May
Line TleBicoml|
DESCRIPTION AND FUNCTIONS
pas
@ D/A CON. DIRECT @ Source Selector @ MASTER LEVEL
When this button is pressed the indicator will Digital type -: As this button is being pressed the
light and with DIGITAL PURE A TYPE !laCD
player or some other cornponent connected
to the DIGITAL INPUT terminal will be heard
in very high grade HiFi sound.
1-12 (No. 20115)
(Unit connected by COMPU LINK can be au-
tomatically operated using the remote control
unit)
DIGITAL 1: Press this button to play a unit
connected to the DIGITAL 1 terminal.
DIGITAL 2: Press this button to play a unit
connected to the DIGITAL 2 terminal.
DAT MONITOR: Press this button to moni-
tor a recording or to play the DAT deck con-
nected to the DAT PciGiTAL | REC or PLAY
terminals on the amplifter. If pressed again the
function will stop.
MASTER LEVEL CONTROL knob will slowly
turn counterclockwise and the volume will be
reduced.
+: As this button is being pressed the
MASTER CONTROL LEVEL will slowly turn
clockwise and the volume will be increased.
© FADE MUTE
When this button is pressed the MASTER LEV-
EL CONTROL knob will turn down and the
sound will be softened.
(Each time the button is pressed the sound wilt
be further reduced.)