Preparing the Remote Control
A battery is included inside the remote control
at the time of purchase.
Remove the insulation sheet before use.
Beam Effective Area
NOTE
The transmitted beam may not be effective
or may cause incorrect operation when the
remote sensor is directly exposed to sunlight
or powerful lighting.
To Reinsert the Battery
Pull out the battery holder by pressing the lock
tab.
Effective distance:
Max. 4 m (13.16 ft)
Remote Sensor
Lock Tab
Lithium Battery
(CR2025)
Attaching the Core Filter to the USB
Cable
The core filter reduces interference caused
when connecting to other devices. Connect
the end of the cable with the core filter to the
camcorder.
Release the stopper.
3 cm (1-3/16")
Wind once.
To be connected to
the camcorder
To Next Page
Loading...
