Recording Files (Continued)
Slide the mode switch to select
# (still image) mode.
Press PLAY/REC to select the
recording mode.
Press and hold SNAPSHOT
halfway.
The ? indicator becomes green when
the captured image is focused.
Press SNAPSHOT fully to take a
still image.
NOTE
•
If the camcorder is not operated for 5
minutes while the power is on, it turns itself
off automatically to conserve power.
•
The sides of still images recorded in 16:9
size may be cut off when printed. Check
whether 16:9 size prints can be printed at
your local print store.
Still Image Recording
To view the last recorded image
Select
A
after shooting.
Selecting $ during playback deletes that
image.
To change the image quality
Change the settings in [IMAGE QUALITY].
To change the image size
Change the settings in [IMAGE SIZE].
To record still images continuously
Set to [CONTINUOUS SHOOTING] in
[SHUTTER MODE].
To change the manual recording mode
Select [A/M] twice.
To Next Page
Loading...
