66
ENGLISH
Symptoms Remedies/Causes
iPod/D. Player playback
• The iPod or D. player does not turn
on or does not work.
• Check the connecting cable and its connection.
• Update the firmware version of the D. player.
•
Charge the battery of the iPod/D. player.
• The sound is distorted.
Deactivate the equalizer either on the unit or the
iPod/D. player.
• “Disconnect” appears on the
monitor.
Check the connecting cable and its connection.
• Playback stops while playing back
iPod.
The headphones are disconnected from iPod
during playback. Restart the playback operation.
• No sound can be heard when
connecting an iPod nano.
Disconnect the headphones from the iPod nano.
• No sound can be heard.
• “Error 01” appears on the monitor
when connecting a D. player.
Disconnect the adapter from the D. player. Then,
connect it again.
• “No Files” or “No Track” appears on
the display.
No tracks are stored. Import tracks to the iPod or
D. player.
• “Reset 1” – “Reset 7” appears on the
monitor.
Disconnect the adapter from both the unit and
iPod/D. player. Then, connect it again.
• “Reset 8” appears on the monitor. Check the connection between the adapter and
this unit.
• The iPod’s or D. player’s controls do
not work after disconnecting from
this unit.
Reset the iPod or D. player.
• Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other countries.
• iPod is a trademark of Apple Computer, Inc., registered in the U.S. and other countries.
AVX2[E].indb 66AVX2[E].indb 66 06.1.26 2:01:48 PM06.1.26 2:01:48 PM
To Next Page
Loading...
Need help?
General
