NOTES:
Belbre pertbrming the lblh*wing steps, make
sure that:
• The Power Switch is set to "PRO. ".
® The camcorJer is in the Reo;rrl-Standby
lY}or]e,
• Tile recordin_ mode is set to "SP'.
m
Select Wheel
Start/Stop Button
MENU Button
Display
RECTIME Menu
INT, TIME Menu
Interval time
indicator
Re_ordlng time
indkator
INT, TIME and REC TIME indications on the normal
stteen
N27
Animfi0n
You can shoot a series (>fpictures, each slightly different,
of the same object for a brief period of time.
Press MENU. The Menu Screen appears.
Rotate the Select Wheel to move the highlight bar to
"NEXT" in Menu Screen 1 and press it to display
Menu Screen 2. Then, move the highlight bar to
"REC TIME" and press it. The REC TIME Menu
appears. Rotate the Select Wheel to move the
highlight bar to the desired recording time, then press
it. The Menu Screen reappears with the highlight bar
on "RETURN".
Press the Select Wheel again to close the Menu
Screen.
Press the Recording Stalt/Str! I} Button after tocusing
on the subject. The recording stops automatically
after the selected period of time.
• Repeat step 4 for the desired number of pictures.
To release the Animation rhode, set "REC TIME" in
the Menu screen to "OFF".
Time-Lapse
You can record sequenti_dly at preset time spans. Leaving
the camcorder aimed at a specific subject, you can record
subtle changes over an extended period of time.
Set "REC TIME" (_-T_ step 1 and 2 of "Animation"
above).
Rotate the Select Wheel to move the highlight bar to
"INT. TIME" and press it. The INT. TIME Menu
appears. Rotate the Select Wheel to move the
highlight bar to the desired interval time, then press it.
The Menu Screen reappears with the highlight bar on
"RETURN". Press the Select Wheel again to close the
MOI/LI Screen.
Press the Recording Start/Stop Button. Recording and
intervals alternate automatically.
REC
To release the Time-Lapse mode, when "_._._," is not
displayed, press the Recording Start/Stop Button to
display " PAUSE ", then set "REC TIME" and
"INT. TIME" in the Menu Screen to "OFF".
NOTES (for Animation and Time-Lapse):
• For best results, make sure the camcorder is secured when sh_*_4ing in Animatk,-1 or Tin_e-Lapse m_*de.
• Fade- or wipe-in/_*ut carlnot be perf_*m_ed during Animation or Time-Lapse shooting:
•_ Bef_re perlbnr_ing other (*peratiorls f_*llowin_ Arlimation or Time-Lapse recording, make sure the Animation
or Time-Lapse mode is deactivated.
•_ Animation and Time-Lapse are canceled when the power is shut offor when the cassette is ejected.
To Next Page
Loading...
