Conlpact video cassetie
Compartment door
Sliding latch
Reels
CassetteAdapter(VHSP[aypak)
Use this t() play bacl< a VHS-C video cassette recorded
with this camcorder on a VHS VCR. It is fully compatible
with any VHS video cassette recorder. The C-P7U adapter
is battery powered and automatically perl(_rms tape
loading and unloading.
Slide tile battery cover up to remove it, install one
"AA (R6)" size battery as shown, then reattach tile
cover.
Slide the latch to open the adapter compartment
door, then insert the cassette and close the compart-
nlent door.
Load the cassette adapter into the VCR and [)lay the
tape back as you would any other.
Slide the latch and the coi_/paitmeilt door opens
automatically. This may take around 10 seconds. Dr)
not attempt to force the adapter open. Then, insert
your finger in the hole on the underside of the
adapter as shown in the illustration at left, and push
up and remove the cassette.
NOTES:
• During tape loading and unloarlin_4, cl_ n_4 t_uch the
reel_ f_r satbty and tape pr_4ectior_.
• During _pecial-efl_ct playback (_l_;w motion, still frame,
etc.), tile picture may vibrate or noise bar_ may appear
on the screen.
@To record on a VCR using a compact cassette arid tile
aclapte_, cover the adapter's recording safety hole with
adhesive tape.
Recording safety hole
To Next Page
Loading...
