MANUAL FOCUS
NOTE:
Ybu should already have made the necessary viewfinder
adjustments _ p& JO). If you haven't, do so before
continuing.
SELECT OPERATION MODE
Set the Power Switch to "PRO.".
° o •
Select Dial Power Switch
Display
/_enu Screen
FOCUS Menu
Manual Focus Screen
ACCESSMENU SCREEN
Press the Select Dial to display the Menu Screen.
ACCESS"FOCUS" MENU
Press the Select Dial.
ACCESSMANUAL FOCUS
Rotate time Select Dial to move time highlight bar to
"MANU", then press it. "@" and "2," appear. Time
focus is locked at this point.
ADJUST FOCUS
To farther subject...
.... rotate the Select Dial upward. "•" appears and
blinks.
Go to step 6.
To nearer subject...
.... rotate the Select Dial downward. "I_" appears
and blinks.
Go to step 6.
END ADJUSTMENT OF FOCUS
Press the Select Dial. Time Menu Screen reappears
with the highlight bar on "RETURN".
CLOSE MENU SCREEN
Press the Select Dial. Time Menu Screen disppears and
,A_ ,' reappears to indicate the focus is locked.
NOTES:
• To return to Auto Focus, select "AUTO" in step 4.
• To re-adjust Manual Focus, repeat the procedure from
step 2.
• Be sure to focus the lens in the maximum telephoto
position when you use the Manual Focus mode. If you
focus in on a certain subject in the wide-angle position,
sharply focused images cannot be obtained when
zoomed in because the depth-of-field is reduced at
longer focal lengths.
• When the focus level cannot be adjusted any farther or
close_ "_ " or "2," will blink.
|
% %
To Next Page
Loading...
