2 •• !i •
MENU Button
I
Select Dial Recording Start/Stop
Button
Display
O
Menu Screen 1
Menu Screen 2
Serf-Timer
You can set the delay between pressing time Recording
Sta rt/Stop button and time actua I start of recording. If you
secure the camcorder, you (or whoever is operating time
camcorder) can enter the scene before recording starts.
NOTE:
Make sure the Power Switch is set to "PRO." and the
camcorder is in the Record-Standby mode before
performing the following steps.
ACCESSMENU SCREEN
Press MENU.
ACCESS "INT. TIME" MENU
Rotate the Select Dial to move the highlight bar to
"NEXT" in Menu Screen 1 and press itto display
Menu Screen 2. Then, move the highlight bar to "IN]_
TIME" and press it.
lSET INTERVAL TIME
Rotate the Select Dial to move the highlight bar to the
desired time, then press it. TimeMenu Screen
reappears with the highlight bar on "RETURN".
CLOSE MENU SCREEN
Press the Select Dial.
STARTDELAYEDRECORDING
Press the Recording Start/Stop Button. When time
selected time has elapsed, recording begins auto-
matically.
To Cancel Self-Timer...
.... Before timerecording begins, press the Recording Start/
Stop Button to display "----PAUSE---- ", then set "IN]_
TIME" in the Menu Screen to "OFF".
INT. TIME Menu REC TIME Menu
TIME indicator
indicator
INT. TIME and REC TIME indications on the normal
screen
To Next Page
Loading...
