REW (._1) Button
EJECTSwitch
STOP (I) Button
Power lamp----_:_" _-
PowerSwi, )
LCD Monitor in Retracted Position
Battery pack remaining power indicator
Tape counter
Recording mode indicator
LOAD A CASSETTE
First open the LCD monitor to aimangle of over 60
degrees. Slide EJECT to open the cassette holder, then
insert the cassette with the label facing out. Press
PUSH to ensure the holder is closed and locked.
SELECT MODE
Make sure time LCD monitor is fully open, then set the
Power Switch to "PLAY". Time power lamp lights.
PLAY BACK
Press PLAY/PAUSE (1_/!1). The playback picture
appears.
STOP PLAYBACK
Press STOP ([]).
Rewindor Fast-Forwardthetape
Press REW (_) to rewind, or FF (1,_) to fast-forward the
tape during Stop mode.
NOTES:
• The camcorder shuts off automatically after about 5
minutes in Stop mode. To turn o/7 again, set the Power
Switch to "POWER OFF", then to "PLAY".
• When the Power Switch is set to "PLAY" and the LCD
monitor is opened at an angle of 60 degrees or more, the
LCD monitor switches on and the viewfinder switches
off automatically to save powel:
• The playback picture can also be viewed in the
viewfinder (with the LCD monitor shut) or on a
connected TV (_.5_ pg. 46, 47). Camcorder operation is
the same as described in this section.
• Ybu can also view the playback picture o/7 the LCD
monitor with it flipped over and retracted.
• During Stop, Fast-Forward or Rewind mode, none of the
indications are displayed on the LCD monitor or in the
viewfinder.
• Ira blank portion o/7 the tape is played back, the screen
may become black. This is not a malfunction.
LCD monitor/viewfinder
indications
indicator
I_ :Playback
1_ :Fast-Forward/
Forward Search
_1 :Rewind/Reverse
Search
Ill :Still Playback
To Next Page
Loading...
