Compact video cassette
Compartment door
latch
Ree[s
Recording safety hole
CassetteAdapter(VHSPiaypak)
Use this to play back aim S-VHS-C/VHS-C video cassette
recorded with this camcorder on a VHS VCR. It is fully
compatible with any S-VHS/VHS vide() cassette recorder.
Time C-P7U adapter is battery powered and automatically
performs tape loading and unloading.
INSERT BATTERY
Slide time battery cover up to remove it, and install
one "AA(R6)" size battery as shown in the
illustration at left, then reattach the cover.
INSERT CASSETTEIN ADAPTER
Slide the latch to open the adapter compartment
door, then insert the cassette and close the
compartment door.
PLAY BACK ON CONNECTED VCR
Load timecassette adapter into the VCR and play the
tape back as you would any other.
REMOVE CASSETTEFROM ADAPTER
Slide time latch and time compartment door opens
automatically. This may take around 10 seconds. Do
not attempt to force the adapter open. Then, insert
your finger in the hole on time underside of the
adapter as shown in time illustration at left, and push
up and remove the cassette.
NOTES:
• During tape loading and unloading, do not touch the
reels for safety and tape protection.
• Tapes recorded in S-VHS or S-VHS ET mode cannot be
played back on a regular VHS VCR. Playback is possible
with a VCR equipped with the S-VHS or SQPB (S-VHS
QUASI PLAYBACK) function.
• During special-effect playback (slow motion, still frame,
etc.), the picture may vibrate or noise bars may appear
on the screen.
• To record on a VCR using a compact cassette and the
adapte_ cover the adapter's recording safety hole with
adhesive tape.
To Next Page
Loading...
