20 EN
RECORDING
Advanced Features (cont.)
Picture Stabilizer
This feature compensates for unstable images caused by
camera-shake, particularly noticeable at high
magnification.
ACTIVATE PICTURE STABILIZER
1
Press P.STABILIZER. “ ” appears in the viewfinder.
•To switch off the Picture Stabilizer, press
P.STABILIZER. The indicator disappears.
NOTES:
●
Accurate stabilization may not be possible if hand
shake is excessive, or under the following conditions:
•
When shooting subjects with vertical or horizontal
stripes
•
When shooting dark or dim subjects
•
When shooting subjects with excessive backlighting
•
When shooting scenes with movement in various
directions
•
When shooting scenes with low-contrast
backgrounds
•
When the Slow Shutter function is activated
(
Z
pg. 17), the Picture Stabilizer cannot be used. If
you try to activate this function while Picture
Stabilizer is engaged, “ ” blinks, telling you that
Picture Stabilizer has been deactivated.
●
Switch off Picture Stabilizer when recording with the
camcorder on a tripod.
P. STABILIZER
To Next Page
Loading...
