JVC GS-TD1 - Backing up All Files

Backing Up All Files
Before making backup, make sure that there
is enough free space in the PC’s HDD.
1
Connect the USB cable and the AC
adapter.
0
Turn off the camcorder by pressing the
M button for about 2 seconds.
.
To USB Connector
AC Adapter
To AC Outlet
(110V to 240V)
To DC Connector
USB Cable
(Provided)
To USB
Connector
2
Press and hold the M button for 2
seconds or more.
0
This unit turns on and the “BACK-UP”
menu appears.
3
Tap “CONNECT TO PC”.
4
Tap “BACK UP”.
.
CONNECT TO PC
BACK UP
0
The provided software Everio
MediaBrowser starts up on the PC.
The subsequent operations are to be
performed on the PC.
5
Select the volume.
.
2
1
Click
Click
6
Start backup.
.
Saving destination (PC)
Click
7
After backup is complete, click “OK”.
If you encounter any problems with the
provided software Everio
MediaBrowser, please consult the
“Pixela User Support Center”.
o
To disconnect this unit from the PC
A
Click “Safely Remove Hardware”.
.
B
Click “Safely Remove USB Mass
Storage Device”.
C
(For Windows Vista) Click “OK”.
D
Disconnect the USB cable and close
the LCD monitor.
28
For more information, refer to the Detailed User Guide
http://manual.jvc.co.jp/index.html/