JVC GS-TD1 - Page 32

Trouble
Trouble Action Page
Power
POWER/CHARGE
lamp starts blinking
when the monitor is
closed.
0
The battery pack is being charged.
10
Recording
Recording cannot be
performed.
0
Check the A / B button.
7
0
Set to the recording mode by tapping the
q button on the screen.
17
Recording stops
automatically.
0
Turn off this unit, wait for a while, and turn
it on again. (This unit stops automatically
to protect the circuit when the
temperature rises.)
-
0
Recording stops automatically after 12
hours of continuous recording.
-
Playback
Sound or video is
interrupted.
0
Sometimes playback is interrupted at the
connecting section between two scenes.
This is not a malfunction.
-
Desired files cannot be
found on the index
screen (thumbnail
display).
0
Press the 3D button to switch to the
desired mode for playback.
7
0
Set “3D VIDEO REC FORMAT” in the
video recording menu to “MP4(MVC)” or
“AVCHD”.
15
0
Tap I/J to select the desired media for
playback.
-
3D images cannot be
seen on a 3D
compatible TV properly.
0
Set “HDMI OUTPUT” in the “COMMON”
menu accordingly.
-
Other problems
The lamp does not flash
during battery pack
charging.
0
Check the remaining battery power.
(When the battery pack is fully charged,
the lamp does not flash.)
7
0
When charging in either a hot or cold
environment, ensure that battery is being
charged within the permitted
temperature range. (Otherwise,
charging may stop to protect the battery
pack.)
10
This unit heats up.
0
This is not a malfunction. (This unit may
become warm when used for a long
time.)
-
32
For more information, refer to the Detailed User Guide
http://manual.jvc.co.jp/index.html/