12
2a. (PC/Windows) Safely remove the SD card from the computer:
a1. Open a File Explorer window and right-click on the SD card’s container
in the window sidebar. A command window pops opens.
a2. Select the “Eject” command. The SD card will disappear from the
window sidebar.
a3. Physically remove the SD card (or adapter) from the computer.
2b. (Mac/macOS) Safely remove the SD card from the computer:
b1. Open a Finder and right-click on the SD card’s container in the window
sidebar. A command window pops opens.
b2. Select the “Eject [SD card name]” command. The SD card will
disappear from the window sidebar.
b3. Physically remove the SD card (or adapter) from the computer.
8. Restoring the camera to its original state
1. Re-insert the SD card into the camera:
1.1. Insert the SD card into its slot in the camera’s controls area.
1.2. Press the exposed (top) edge of the SD card until that edge is flush
with the slot opening.
2. Push in/close the camera
’
s display panel.
3. Re-attach the lens cap onto the lens:
3.1. Pinch and hold the cap’s two side-releases.
3.2. Press the cap into
/
against the housing of the lens.
3.3.
R
elease the cap’s side-releases.
4
.
I
f the camera is detached from its tripod
,
place it on a des
k
and notify
staff.
To Next Page
Loading...
