JVC HR-A51U - Stereo and SAP Recording; Recording SAP Programs

EN 27
Stereo And SAP
(Second Audio Program)
Your VCR’s built-in MTS decoder enables reception of Multi-
channel TV Sound broadcasts.
When the channel is changed...
● The "STEREO" indication appears on the screen for about 5
seconds if the program is a stereo broadcast.
● The "SAP" indication appears on the screen for about 5
seconds if the program is an SAP broadcast.
● Both indications appear when a stereo program is
accompanied by SAP audio.
To Record Stereo Programs . . .
. . . simply follow the basic recording procedure.
To Listen To Stereo Soundtrack During Recording . . .
. . . set "AUDIO MONITOR" to "HI-FI" at the Function screen
(墌 pg. 25).
12 3
45
0
6
7 8 9
1
2
4
3
–
+
NOTES:
● If a SAP program is received and "2ND AUDIO RECORD" is
set to "ON", the SAP audio is recorded on both the Normal
and Hi-Fi tracks. The main audio program is not recorded.
● If a non-SAP program is received, the main audio is recorded
on both the Hi-Fi and Normal audio tracks.
OK
CH
MENU
MENU
OK
SHUTTLE PLUS
To Record SAP Programs . . .
ACCESS MAIN MENU SCREEN
1
Press MENU.
ACCESS FUNCTION SET SCREEN
2
Move the highlight bar (arrow) to "FUNCTION SET" by
pressing CH
5
∞ or SHUTTLE PLUS
%
fi, then press OK
or SHUTTLE PLUS .
SELECT 2ND AUDIO RECORD SET
MODE
3
Move the highlight bar
(arrow) to "2ND AUDIO
RECORD" by pressing CH
5
∞ or SHUTTLE PLUS
%
fi, then press OK or
SHUTTLE PLUS to set to
"ON".
RETURN TO NORMAL SCREEN
4
Press MENU.
%
%
FUNCTION
=AUTO PICTURE ON
PICTURE CONTROL AUTO
AUTO TIMER OFF
SUPERIMPOSE ON
AUTO SP
=EP TIMER OFF
NEXT PAGE
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
PREVIOUS PAGE
VIDEO STABILIZER ON
=2ND AUDIO RECORD ON
AUDIO MONITOR HI-FI
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END