PLAYBACK AND RECORDING FEATURES (cont.)
To Record SAP Programs . . .
ACCESS MAIN MENU
SCREEN
1
Press MENU.
ACCESS FUNCTION SET
SCREEN
2
Place the arrow next to "FUNCTION SET" by pressing
CH
5
∞
, then press OK.
ACCESS 2ND AUDIO
SCREEN
3
Place the arrow next to "2ND AUDIO" by pressing
CH
5
∞
,then press OK.
SELECT MODE
4
Place the arrow next to
"ON" by pressing CH
5
∞
.
RETURN TO NORMAL
SCREEN
5
Press MENU as many times as necessary.
NOTES:
●
If a SAP program is received, the SAP audio is recorded on
both the Normal and Hi-Fi tracks. The main audio program is
not recorded.
●
If a non-SAP program is received, the main audio is recorded
on both the Hi-Fi and Normal audio tracks.
2ND AUDIO
=ON
OFF
PRESS (
5
,∞) TO SELECT
PRESS (MENU) TO END
Stereo And SAP
(Second Audio Program)
Your VCR’s built-in MTS decoder enables reception of Multi-
channel TV Sound broadcasts.
● The ST indicator on the front display panel lights during
stereo broadcast reception, and SAP lights during SAP
program reception.
● Both indicators light when a stereo program is accompanied
by SAP audio.
To Record Stereo Programs . . .
. . . simply follow the basic recording procedure.
To Listen To Stereo Soundtrack During Recording . . .
. . . select "HI-FI" at the Audio Monitor screen (Z pg. 18).
To Next Page
Loading...
