JVC HR-J270EK - Slow Motion; Pause During Playback

13
Slow Motion
ACTIVATE SLOW-MOTION
PLAYBACK
1
During still picture, press and hold PAUSE for 2
seconds, then release. Press and release again to return
to still picture.
OR
During still picture, press and hold @ or # . Release to
return to still picture.
To resume normal playback, press PLAY.
Still Picture/Frame-By-Frame
Playback
PAUSE DURING PLAYBACK
1
Press PAUSE. If there is vertical jitter, use the PR buttons
to correct the picture.
ACTIVATE FRAME-BY-FRAME
PLAYBACK
2
Press PAUSE. Each time PAUSE is pressed the tape will
advance one frame.
OR
Press @ or # . Each time one of these buttons is pressed
the tape will move one frame in the direction of the
arrow.
To resume normal playback, press PLAY.
High-Speed Search
ACTIVATE HIGH-SPEED
SEARCH
1
During playback or still picture, press FF for forward
high-speed search, or REW for reverse high-speed
search.
To resume normal playback, press PLAY.
NOTE:
For short searches, press and hold FF or REW during playback or
still picture. When released, normal playback resumes.
ACTIVATE VARIABLE-SPEED
SEARCH
1
During playback, press @ or # .
● The more times you press, the faster the playback
picture moves.
● To decrease speed, press the button for the opposite
direction.
To resume normal playback, press PLAY.
Variable-Speed Search
ATTENTION
In the search, still, slow-motion or frame-by-frame
playback mode,
●
the picture will be distorted.
●
noise bars will appear.
●
there will be loss of colour with a tape recorded in LP
mode.
●
Please note that on models HR-J270EK the picture may
be distorted in these modes.