welcome to jvc 9
GETTING EVERYTHING READY (continued)
connect cables Connect the cables as indicated in the diagram (below), using
the TV Aerial Cable, the
RF Cable and the 21-pin SCART Cable (not provided).
scart and rf
SCART is a
recommended option
because its use
improves the quality of
the picture.
If connecting to a stereo
TV you will need a
SCART cable.
There are several types
of SCART cables, fully-
wired and others.
If you use a SCART
cable, you must also
connect the RF cable.
You are now ready to start the Plug&Play Setup which begins on the next page.
Do not turn on the VCR. When the main power cord is first plugged into a
main outlet, the VCR performs Plug&Play Setup. (Z pg. 10)
RF Cable
(provided)
TV Aerial
Cable
(not
provided)
21-pin SCART Cable
(not provided)
Mains Power
Cord
Mains Outlet
Back of VCR
HR-J295EK-EN/p08-12 2/27/2, 2:50 PM9
To Next Page
Loading...
