JVC HR-J638E/EH - Edit from a Camcorder; Start Recorder

EN 27
You can use a camcorder as the source player and your video
recorder as the recorder.
Edit From A
Camcorder
MAKE CONNECTIONS
1
Connect the camcorder’s AUDIO/VIDEO OUT
connectors to the recorder’s front panel AUDIO/VIDEO
input connectors.
● Use the L connector for monaural connection.
● When a Master Edit Control-equipped JVC camcorder
is used, the camcorder is capable of controlling the
recorder. Refer to the camcorder’s instruction manual
for operating procedure.
SET RECORDER’S INPUT
MODE
2
Press NUMBER key “0”. “F-AU” appears in place of a
channel number.
START CAMCORDER
3
Engage its Play mode.
START RECORDER
4
Engage its Record mode.
NOTE:
Connections made to the front panel AUDIO/VIDEO input
connectors automatically override those made to the rear panel
AUDIO/VIDEO input connectors.
12
45
3
6
8
0
7
9
1
3
2
NUMBER "0"
6
q
Player
VIDEO
IN
AUDIO
IN
Recorder Your recorder
To the rear panel PAUSE
connector
Editing Cable
(not provided)
AUDIO OUT
EDIT
Audio/Video Cable
(not provided)
VIDEO OUT
Camcorder