K
Kenneth StantonAug 1, 2025
What to do if the JVC HR-J672EU VCR remote control won’t function?
- KkimjayAug 1, 2025
If the remote control for your JVC VCR isn't working, the batteries may be dead. Try replacing them with new ones.
To Next PageTo Next PageWhat to do if the JVC HR-J672EU VCR remote control won’t function?
If the remote control for your JVC VCR isn't working, the batteries may be dead. Try replacing them with new ones.
How to troubleshoot no power to my JVC HR-J672EU VCR?
If your JVC VCR isn't getting any power, make sure the mains power cord is properly connected.
Why is the JVC VCR playback picture blurred?
If the playback picture on your JVC VCR is blurred, interrupted, or if you see a "USE CLEANING CASSETTE" message, the video heads may be dirty. Use a dry cleaning cassette TCL-2UX or consult your JVC dealer.
What to do if the JVC HR-J672EU playback picture does not appear?
If you don't see a playback picture on your JVC VCR while the tape is running, here's what to check: * If using an RF connection: Ensure your TV receiver is set to the correct video channel and that the recorder’s video channel is correctly set. * If using an AV connection: Make sure your TV is set to AV mode.
General| Type | VCR |
|---|---|
| Video Format | PAL |
| Tuner | Yes |
| Number of Heads | 4 |
| Remote Control | Yes |
| Power Supply | AC 220-240V, 50Hz |
| Playback System | PAL |
| Connections | SCART |
| Fast Forward/Rewind Time | Approx. 2.5 minutes (for E-180 tape) |
