JVC HR-S29U - Clock Setting; Preparations

10 EN
INITIAL SETTINGS (cont.)
Clock Setting
Perform clock setting only if the clock has not been set
correctly by the Plug & Play setting or if you use a cable
box.
Access the Clock Set screen to perform the Semiauto or
Manual Clock Set. Each procedure starts from step 4
after preparation steps below are finished.
If you use a cable box, set the clock manually. (墌 pg. 12)
Preparations
1
Access Main Menu screen
Press MENU.
2
Access Initial Set screen
Press SHUTTLE PLUS
%fi to move the
highlight bar (arrow) to
“INITIAL SET”, then
press OK or SHUTTLE
PLUS
# .
3
Select clock set
Press SHUTTLE PLUS
%fi to move the
highlight bar (arrow) to
“CLOCK SET”, then
press OK or SHUTTLE
PLUS
# .
● “CABLE BOX USERS SET CLOCK MANUALLY”
appears on the screen for about 5 seconds, then
the Clock Set screen appears.
Turn on the VCR and the TV, and select the VCR
channel 3 or 4 (or AV mode) on the TV.
MAIN MENU
FUNCTION SET
TUNER SET
= INITIAL SET
PRESS (5,∞), THEN (OK)
PRESS (MENU) TO END
INITIAL SET
= CLOCK SET
LANGUAGE ENGLISH
GUIDE CHANNEL SET
CABLE BOX SET
DBS RECEIVER SET
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
123
456
7
89
0
2
4
1
3
1 8
2 – 7
2 – 7