JVC HR-S5000 User Manual

C. Independent Remote Programming
@The remote control incorporates 4 programme memories
(A, B, C and D).
®The programmed data is held in memory even after it has
been transferred to the recorder.
AUDIO
ANZEIGE MONITOR MENU/TEXT
——
ves /KANAL|
TREIGABE.
AUFZ.NA LOSCHEN O70 TVPR A
aNWARL "RUCKST «= “he CURSOR =P
INDEX ZIELLAUF TITELBILD __SP/LP
= TETSETE Es
L—___"‘serre
« uu cS
Etsicaa
MB Press AUFZ. NR. @ .
@The LCD will be activated
for programme memory
myn.
®To advance to programmes
B to D, press again.
BH Enter the date using numeric keys @ .
Setting for a daily or weekly serial is the same as described
in “A, Local Programming”.
sO MO DI Mi
A
stam NI 7.
OO FR SA
“IN
STOP
For weekly serial setting
For daily serial setting
EB When the display changes to the next stage, enter the start
time, stop time and channel in succession.
@For programming the timer to record an external source,
press the numeric key ‘’0” while the channel is blinking;
“0” will appear on the LCD and when transferred in
step @ . “AU” will appear in the channel display section
on the FDP.
@After the channel has been entered, the transfer-ready
mark will appear and blink.
Transfer-ready mark
STOP 13: 7
@When not using the VPS recording system, press VPS/
KANAL to make VPS” disappear.
EB Press SP/LP @ to obtain the desired recording mode
indication on the display.
@The SP or LP entry can be made anytime while in the
Timer Set mode.
§i Direct the remote control to the recorder’s Remote
Sensor window @ and press UBERTRAG @.
@The programmed data wilt be loaded in one of the
recorder’s memories (1 — 8}, the vacant one of the
smallest programme number.
If all programme memories are full, the recorder’s clock
will blink and transference will not take place.
®Call up the programme(s) to be cancelled by pressing
VIDEO AUFZ. NR. @, then press VIDEO LOSCHEN
@ to cancel it. Data transfer can now be made by press-
ing UBERTRAG again.
Ei Press SCHALTUHR @ .
®@Check to see that the TIMER indicator and other items on
the recorder’s FDP respond correctly. (See page 57.)
Setting the date, start and stop times, and channel
®(t is not possible to set the date, start and stop times unless
the date and clock have previously been set.
Enter the date while the digits are blinking.
@Unless the start time has been properly set, stop time set-
ting is not possible.
®@The stop time can be set within 24 hours from the start
time.
@Non-applicable numbers (such as January 32, February 30
for dates, 24 or larger for hours, 60 or larger for minutes
and 49 or larger for channels) wil! be rejected when keyed in.
Cancelling the preset data
@The preset programmes can be cancelled. First engage the
Timer Set mode for the programme number you wish to
cancel and then press the LOSCHEN/UBERSPRINGEN
button @ or VIDEO LOSCHEN @ . Or for the remote
control’s memory, press LOSCHEN @ .
@Unless the VPS mode is engaged, an executed programme is
automatically cleared.
Checking the programmed data
®@Checking and re-programming can be performed anytime,
even when the SCHALT UHR button has already been engaged.
®@While recording is actually taking place according to one
Preset programme, all other preset programmes can be
checked or re-programmed.
®To disengagé the Timer Set mode, press the ANZEIGE
button @ (on the recorder) or the ANZEIGE button @
(on the remote control).
Timer recording operation
@When the preset start time is reached, recording starts.
e@After timer recording, the power is switched off. If the
tape end is reached during timer recording, the cassette is
automatically ejected and the power is switched off.
How to use the cursor keys @ ®
@lf you press a wrong key and the flashing position has
advanced, press ZURUCK to return to the previous posi-
tion for correction.
®@Once all data have been programmed, you can reach
any position for correction using ZURUCK or VOR. The
flashing position is ready for re-entry.
@Pressing AUFZ. NR. on the recorder or VIDEO AUFZ.
NR. on the remote control engages the FDP in the check
mode in which no position flashes and data correction is
not possible. Pressing AUFZ. NR. on the remote control
engages the LCD in the transfer-ready mode in which the
transfer-ready mark is flashing and data correction is not
possible. For correction of data, press either cursor
key to move to the position which requires correction.
ENGLISH
ENGLISH
| VPS RECORDING
In the VPS (Video Programme System) system, TV stations transmit different VPS codes for different TV programmes, which
control the starting and stopping of the video recorder and have precedence over times preset in the timer for accurate recording
of a particular programme from start to finish.
Press AUFZ.NR. @ (or VIDEO AUFZ. NR. @ ) or, for
the remote control’s memory @ .
Ei Set the date, start time, stop time and channel! in the same
way as for timer programming.
Press KANAL/VPS @ or VPS/KANAL @.
®All timer data will be converted to VPS codes and stored
in memory.
Ei Press SCHALTUHR @, or @
®@The recorder will enter the VPS standby mode at 20:00
on the day previous to the preset day and remain engaged
until 3.59 on the following day, if the intended pro-
gramme has not yet been broadcast.
@When a VPS code corresponding to the intended TV
programme is detected during the VPS standby mode
recording will start. When the VPS code changes to
another, recording will stop.
@When an interruption code is detected during VPS
recording, the VPS standby mode is engaged and record-
ing restarts when the regular VPS code is restored.
Channel
Start time
Weekly seria!
indicator
VPS indicator Notes:
@When not using the VPS recording system, press KANAL/
VPS @ to make “VPS” disappear on the FDP.
®Operation at the end of VPS recording is the same as with
ordinary timer recording.
Programme Daily serial Stop time
number indicator
VPS indicator age i2:4da? F
an FC |

JVC HR-S5000 Specifications

Power

power requirement	220 V, 50/60 Hz
power consumption	44 W

Operating Environment

operating temperature	5°C to 40°C
storage temperature	-20°C to 60°C
operating humidity	25% to 80%
storage humidity	35% to 80%

Video Specifications

video signal system	PAL colour and separated Y/C signals, 625 lines
horizontal resolution (S-VHS)	More than 400 lines
horizontal resolution (VHS)	250 lines

Audio Specifications

frequency response	20 Hz — 20, 000 Hz
dynamic range	More than 90 dB
wow and flutter	Less than 0.005 % WRMS

TV Tuner/RF Section

channel storage capacity	48 channels
aerial input VHF frequency range	47 — 89 MHz, 104 — 300 MHz, 302 — 470 MHz
aerial input UHF frequency range	470 — 862 MHz

Weight and Dimensions

width	435 mm
height	105 mm
depth	380 mm
weight	7.4 kg