JVC HR-S5200U - Playback System Controls and Recording Operations; Playback System Controls; Recording Operations

P Playback (cont'd)
A/B CODE
switch
Your VCR
STRAT
; PAUSE/SPECIAL
FUNCTION
Mini-plug Cable
(provided)
AV COMPU LINK Ii
VIDEO IN te
AV COMPU LINK
Television-
EN-24
To control two JVC VCRs
The remote control is capable of controlling two JVC VCRs
independently using the A/B CODE switch . You can set this
VCR so, that it responds to the remote control only when the
switch is in the "B" position and set another JVC VCR ‘so tHat it
responds only when the switch is in the "A" position. This way
you can control two JVC: VCRs independently with a single
temote control.
The A/B CODE switch is preset to the "A" position because your
VCR is initially set to respond to A code signals. You can easily
modify your VCR to respond to B code signals.
(1) Unplug the VCR's power cord from the AC outlet,
Set the A/B CODE switch on the remote control unit to"B".
[3] Plug the VCR's power cord back into the AC outlet. Do not
use other remote controls at this stage.
(4) Turn the VER power on using the remote control's POWER
button. The VCR will now respond only to B code signals.
Ss
AV COMPU LINK Playback
Your VCR. is compatible with JVC's. AV COMPU LINK.
|_components which include amplifiers (or receivers) and televisions.
PREPARATION .
1] Connect your VCR to an AV COMPU LINK amplifier and/or
__ an AV COMPU LINK television as illustrated.
2] Press MENU, SET, and
SELECT as many times as SPECIAL FUNCTION
necessary to access the RAEDITIPAUSE
SPECIAL FUNCTION screen. @ AV COMPU-LINK
@p.7)
{3} Press SET to choose “AV
COMPU-LINK".
PRESS (END) TOEND
{4} Press MENU as many times as
necessary to exit.
OPERATION
f AV COMPU LINK video playback is as easy as this:
| Simply load a cassette in your VCR and press PLAY. (If the
cassette's safety tab has been removed, it is not necessary to
press play.) The TV (and amplifier) turn on automatically and
the TV's mode is automatically set to VIDEO; you're ready to
watch!
@ Connection varies according tothe type of TV. Please read
your TV's instruction manual when making TV connection.
& Recording
POR INSTRUCCIONES EN
ESPANOL VEA p. 42 — 43,
TV
signals
being
received
by
the
VCR's
built-in
tuner
can
be
recorded
onto
a
video
tape.
This
is
realtime
video
recording.
POWER ON;
SELECT CHANNEL,
3 OR 4 (OR AV MODE)
Cc. RESET
Digit keys
DAD A CASSETT
1 Insert a cassette with the safety tab present,
™ The VCR power will come on automatically.
"If
watching
on
channel
3
or
4
be
sure
that
the
VIDEO
indicator
is
lit.
If
the
indicator
is
not
lit,
press
TV/VIDEO
so that it lights.
ee ee, wrn bt d 4 AL Ee Wwe eee
2
Press
CH(annel)
+/—
(or
the
digit
keys
followed
by
ENTER)
to
select
the
channel
you
wish
to
record.
m
Even
if
you
don't
press
ENTER,
the
channel
will
automatically change in about 2 seconds.
i "Press PAUSE.
5
6 Press PLAY to resume recording.
7 Fre STOP, i Paid
To watch a program while recording
another
During Recording... :
(1] Press TV/VIDEO. The VCR's VIDEO indicator and the TV
broadcast being recorded will disappear.
{2]
Use
the
channel
controls
on
the
TV
to
select
the
other
channe! you wish to view.
™ The program Selected with the TV channel controls will
‘appear on the TV screen while the one selected with the
VCR channel'controls will be recorded on the tape.
——
To display the elapsed recording time
Before starting recording...
[1] Press C. RESET.
@ The counter will be reset to "OH 00M 00s", and will show
the exact elapsed time as the tape runs.
(2} After starting recording, press OSD at any time to check the
elapsed time on the TV screen.
i (3] Press OSD again to clear it from the screen.
EN-25